Traffic Barriers and Vehicle Access Gates

Home Welcome to Simply Secure Traffic Barriers and Vehicle Access Gates

barriers and access gatesWhether your application is residential or commercial, Simply Secure can supply and install a varied range of automatic or manual barriers and access gates with the flexibility to suit your needs. If a large area span is required, we are able to offer heavy duty barriers capable of raising and lowering a pole length of up to 9 metres. Short span barriers are also available for many types of application. Using the latest technology and coupling it with tried and tested methods, Simply Secure offer superior products giving long service life and peace of mind.

Automatic Raise Arm Barriers

Barrier and Access Gates Our range of automatic raise arm barriers are designed to offer long term reliability, efficient operation and durability. Incorporating an integral 3 phase inverter driven motor and gearbox drive which provides a smooth consistent operation (single phase supply), Simply Secure automatic barriers can be programmed to suit any requirement. We would be delighted to offer advice and a no obligation site survey to ensure our products meet our client’s specifications.

 

Simply Secure automatic barriers can be combined with either one or two (dependant on entrance width) Automatic Rising Bollards to provide a fully secure ram proof entrance.

Barriers and Bollards can be controlled separately or combined allowing the option to leave the bollards in the lowered position at certain times of the day but still control the entrance by means of the barrier.

All Simply Secure automatic barrier systems can be interfaced with unlimited access control options, such as proximity cards, remote control, vehicle identification tags, keypads, token or coin machines or can be integrated with your existing security systems.

 

Top and bottom skirting is also available to prevent pedestrians from gaining access by going either under or over the barrier arm. Skirting folds vertically when the barrier is raised and is made from strong, lightweight materials to reduce additional loading on the barrier motor. Aluminium arm is finished in either alternate red and white or alternate yellow and black vinyl hatching as standard, (other colour options available upon request).

Contact us at Simply Secure on 0845 521 2834 for more information on Traffic Barriers and Vehicle Access Gates

Manual Arm Barriers

Barriers and GatesManual raise arm barriers from Simply Secure provide an ideal low cost solution to a wide variety of parking, road access and traffic management requirements. This type of barrier can be locked in either the vertical or horizontal position, providing excellent security to any specified area when required.

Constructed from high quality steel and utilising a strong but lightweight aluminium pole arm counterbalanced by supporting weights, Simply Secure manual barriers offer an excellent and cost effective solution for locations or situations where a fully automated barrier entry system is either not a necessity or not cost effective.

Simply Secure can also provide a full site survey, plus preparation and installation service to meet individual client specifications.

Swing Access Gates

Barriers and gatesSimply Secure swing access gates are available with single or double leaf designs, and are supplied with 100x100x4mm mild steel square hollow section support posts and 60x60x3mm mild steel gate. Spans from 3m to 6.5m available, manufactured to meet customer specification. Comes complete with padlock. Posts may be surface mounted or sunken. Can also be supplied with additional latch post to lock in the open position. Powder coated to customer specification or available with galvanised finish.

 

Height Restriction Barriers

Barriers and gates Simply Secure height restriction barriers are available with single or double leaf designs, and are supplied with 100x100x4mm mild steel square hollow section vertical posts and 80x80x3mm mild steel hinged section with 40x40x3mm cross brace welded diagonally to corner. Standard height 2.1m (can be manufactured to customer specification). Spans from 3m to 12m (double swing) manufactured to customer specification Comes complete with ‘WARNING HEIGHT RESTRICTION’ signage and padlock. Posts may be surface mounted or sunken. Can be supplied with additional latch posts to lock both crossmember & gate in the open position. Powder coated to customer specification or available with galvanised finish.

Contact us at Simply Secure on 0845 521 2834 for more information on Traffic Barriers and Vehicle Access Gates