Description
The Abbey double gate is a pair of low black metal driveway gates, 812mm high. They mark and close the drive without hiding the house, and the pattern stays the same style as the Abbey garden gates.
Sizes: low metal driveway gates for a 10ft gap
Measure post to post at the drive. The listed width already includes the hinge and latch gaps. The pattern layout varies a little with the width, so check all the product images.
- 2413mm (95in) gap
- 2755mm (108.5in) gap
- 3095mm (121.8in) gap
- 3264mm (128.5in) gap
- 3530mm (139in) gap
- Gate frame height 812mm on every size
- Burbage offer limited made to measure on this range because the pattern is a fixed size. Call for a quote.
Construction and finish
Solid steel with 25mm x 8mm frames, 10mm round infill bars and 6mm pattern bars. Two drop bolts let you secure the gates open or closed.
The finish is electro-galvanised for added rust resistance, then powder coated black. That is not a rust-proof guarantee. Look it over now and then, touch up any chips, and expect to repaint every couple of years. Moving parts need touching up more often.
What’s included
- Hinge angle brackets and bolts
- Rocker latch
- Two drop bolts
Screws and wall plugs are not included. Paint the nuts and bolts after fitting to stop them rusting.
Posts and fixing
Suitable posts: blank 50mm or 70mm square concrete-in posts, with flat or ball tops. They need drilling on site. A 70mm square post suits the double gates. Ask us which size suits your gap. Burbage point out that the gate is heavy, so check the post or brickwork is strong enough to carry it. Blank metal posts need drilling on site for the hinge and latch brackets.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
