Description
A flat-topped single garden gate, 1800mm (71″, roughly 6ft) high, in closed tongue and groove boarding. It is the straightforward Carlton gate for a side or back garden.
Square top closed board gate sizes
The gate is sold in these widths: 750mm (29.5″), 900mm (35.5″), 1050mm (41.3″). Listed widths are the gate itself, not the opening, so allow for hinge and latch gaps when you measure post to post. Burbage offers a made-to-measure service for the Carlton range. Ring us for a quote.
- Height: 1800mm (71″)
- Gate width: 750mm (29.5″), 900mm (35.5″), 1050mm (41.3″)
- Timber: planed Scandinavian Redwood, 42mm thick on the framed sides
- Bracing: half lap joints
- Boards: tongue and groove, 95mm wide x 14mm thick, nailed and glued to the bracing
Construction and finish
Smooth planed Scandinavian Redwood from managed forests, with half lap bracing and boards nailed and glued on.
What’s included
The gate only. Hinges, latch, bolts, screws, wall plugs and posts are not included.
Posts and fixing
Fittings that suit this range: GGFS (18 inch T-hinges and latch, black or galvanised). Suitable timber posts: WP38S (70x70x2400mm, wall mounted), WP48S (100x100x2400mm, square top) and WP48P (pyramid top). Posts or brickwork must be strong enough to carry the gate. Ask us what suits your opening.
Usually made to order, so ring us for the current lead time. Timber sizes vary slightly with the weather. Tanalith-E treatment is not a rot guarantee: inspect and re-treat regularly, and apply a final finish after fitting.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
