Description
A pair of tall shaped-top estate gates in the swan neck style. The high side is 1800mm (71″) and the low side is 1500mm (59″). You choose whether the high point or the low point sits at the centre when they are hung.
Tall swan neck driveway gates 1800mm: sizes
The pair is sold in these widths: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″). Listed widths are the gate itself, not the opening, so allow for hinge and latch gaps when you measure post to post. Limited made-to-measure sizes are available in this range. Ring us for a quote.
- Height: 1800mm (71″) on the high side, 1500mm (59″) on the low side
- Overall width of the pair: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″)
- Timber: smooth planed Scandinavian Redwood, 70x70mm frame
- Bracing: 70x54mm and 44x44mm
- Boards: tongue and groove, 95mm wide x 14mm thick
Construction and finish
Smooth planed Scandinavian Redwood from managed forests, with boards nailed and glued to the bracing and mortise and tenon joints. The shaped top is a swan neck curve and can be hung high or low centre.
What’s included
The pair of gates only. Hinges, latch, bolts, screws, wall plugs and posts are not included.
Posts and fixing
Fittings that suit this range: EGFS (24 inch hook and band hinges, latch and drop bolt, black or galvanised). Suitable timber posts: WP48S and WP48P (100x100x2400mm) or WP49S (100x100x2600mm) for DR91 and DR92, or WP68P (150x150x2400mm, pyramid top) for the whole range. Posts or brickwork must be strong enough to carry the gate. Ask us what suits your opening.
Usually made to order, so ring us for the current lead time. Timber sizes vary slightly with the weather. Tanalith-E treatment is not a rot guarantee: inspect and re-treat regularly, and apply a final finish after fitting.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
