Description
A flat top garden gate with ball finials, available at two heights: 915mm (36in) for a standard front gate or 1220mm (48in) for more height. The 48in gate is made for one gap only, 914mm (3ft).
Gate heights, sizes and fitting
- 36in gate (MAZP05): gaps 762mm (2ft 6in), 914mm (3ft) or 1067mm (3ft 6in); 915mm to the top of the ball finials, frame 820mm
- 48in gate (MAZP06/3): 914mm (3ft) gap only; 1220mm to the top of the ball finials, frame about 1126mm
- Hinge and latch gaps are already allowed for
Construction and finish
- Solid steel
- Frame 25mm x 10mm; infill bars 12mm
- Electro-galvanised, then powder coated black
- Universal: hangs left or right hand
The galvanising and powder coat add rust resistance, but they are not a 100% rust-proof guarantee. Check the finish now and then and touch up any chips with paint. Paint the nuts and bolts after fitting, and keep touching up the hinges and other moving parts. Made-to-measure sizes are available on this range, so ring us for a quote. Made-to-measure metal is normally supplied primed only unless agreed otherwise, so it needs painting.
What’s included
The gate comes with angle brackets, bolts, and a tip latch and catch. Screws and wall plugs are not included.
Posts and fixing
Blank metal posts are sold separately. The 50mm square, 1500mm concrete-in post suits the 915mm gates; ring us for the right post for the 1220mm gate. They need drilling on site to take the brackets. The post or brickwork must be strong enough to carry the gate.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
