Description
A pair of low tongue and groove driveway gates, 900mm (35.5″) high, for an open front drive or a cottage garden entrance. They mark the boundary without blocking the view.
Low wooden driveway gates 900mm: sizes
The pair is sold in these widths: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″). Listed widths are the gate itself, not the opening, so allow for hinge and latch gaps when you measure post to post. Made-to-measure sizes are available in this range. Ring us for a quote.
- Height: 900mm (35.5″)
- Overall width of the pair: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″)
- Timber: smooth planed Scandinavian Redwood, 70x70mm frame
- Bracing: 70x54mm and 44x44mm
- Boards: tongue and groove, 95mm wide x 14mm thick
Construction and finish
Smooth planed Scandinavian Redwood from managed forests, with boards nailed and glued to the bracing and mortise and tenon joints.
What’s included
The pair of gates only. Hinges, latch, bolts, screws, wall plugs and posts are not included.
Posts and fixing
Fittings that suit this range: SGFP (18 inch) for QUD10 and QUD11, or EGFS (24 inch) for QUD10 to QUD14. Both are hook and band sets with latch and drop bolt, in black or galvanised. Suitable timber posts: WP44S (100x100x1350mm) for QUD10 and QUD11 only, WP46S and WP46P (100x100x1650mm), or WP55P (125x125x1525mm, pyramid top). Posts or brickwork must be strong enough to carry the gate. Ask us what suits your opening.
Usually made to order, so ring us for the current lead time. Timber sizes vary slightly with the weather. Tanalith-E treatment is not a rot guarantee: inspect and re-treat regularly, and apply a final finish after fitting.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
