Description
A low timber garden gate for front gardens and paths, 1200mm (47″) high, with a black metal infill panel set into the timber frame. It is the shorter of the two single Windsor gates.
Low wooden garden gate sizes
The gate is sold in these widths: 750mm (29.5″), 900mm (35.5″), 1050mm (41.3″). Listed widths are the gate itself, not the opening, so allow for hinge and latch gaps when you measure post to post. Burbage does not offer made-to-measure sizes in the Windsor range, because the infill panel is a fixed size.
- Height: 1200mm (47″)
- Gate width: 750mm (29.5″), 900mm (35.5″), 1050mm (41.3″)
- Timber: smooth planed Scandinavian Redwood, 70x70mm frame
- Bracing: 70x54mm and 44x44mm
- Boards: tongue and groove, 95mm wide x 14mm thick
- Infill: steel panel, electro galvanised and powder coated black
Construction and finish
Smooth planed Scandinavian Redwood from managed forests, with boards nailed and glued to the bracing and mortise and tenon joints. The metal infill panel is electro galvanised and powder coated black. It resists corrosion better but is not 100% rust-proof, so touch up any chips.
What’s included
The gate only. Hinges, latch, bolts, screws, wall plugs and posts are not included.
Posts and fixing
Fittings that suit this range: SGFS (18 inch hook and band hinges and latch, black or galvanised). Suitable timber posts: WP36S (70x70x1800mm, wall mounted), WP46S (100x100x1650mm, square top) and WP46P (the same size with a pyramid top). Posts or brickwork must be strong enough to carry the gate. Ask us what suits your opening.
Usually made to order, so ring us for the current lead time. Timber sizes vary slightly with the weather. Tanalith-E treatment is not a rot guarantee: inspect and re-treat regularly, and apply a final finish after fitting.
Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.
