Windsor Timber Driveway Gate – 1200mm High

Price range: £799.20 through £1,024.20

A pair of low wooden driveway gates, 1200mm (47″) high, with black metal infill panels in a 70x70mm timber frame. Widths from 2400mm (94.5″) to 3600mm (141.7″). Pressure treated Scandinavian Redwood. Fittings and posts are extra. Usually made to order, so ring us for the lead time.

SKU: WID30/34 Category: Brand:

Description

A pair of low wooden driveway gates, 1200mm (47″) high, for an open front drive where you want a boundary rather than a screen. Each gate carries a black metal infill panel.

Low wooden driveway gates 1200mm: sizes

The pair is sold in these widths: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″). Listed widths are the gate itself, not the opening, so allow for hinge and latch gaps when you measure post to post. Burbage does not offer made-to-measure sizes in the Windsor range, because the infill panel is a fixed size.

  • Height: 1200mm (47″)
  • Overall width of the pair: 2400mm (94.5″), 2700mm (106.3″), 3000mm (118″), 3300mm, 3600mm (141.7″)
  • Timber: smooth planed Scandinavian Redwood, 70x70mm frame
  • Bracing: 70x54mm and 44x44mm
  • Boards: tongue and groove, 95mm wide x 14mm thick
  • Infill: steel panel, electro galvanised and powder coated black

Construction and finish

Smooth planed Scandinavian Redwood from managed forests, with boards nailed and glued to the bracing and mortise and tenon joints. The metal infill panel is electro galvanised and powder coated black. It resists corrosion better but is not 100% rust-proof, so touch up any chips.

What’s included

The pair of gates only. Hinges, latch, bolts, screws, wall plugs and posts are not included.

Posts and fixing

Fittings that suit this range: SGFP (18 inch) for WID30 and WID31, or EGFS (24 inch) for the whole range. Both are hook and band sets with latch and drop bolt, in black or galvanised. Suitable timber posts: WP46S and WP46P (100x100x1650mm) for WID30 and WID31, or WP64P (150x150x1650mm, pyramid top) for the whole range. Posts or brickwork must be strong enough to carry the gate. Ask us what suits your opening.

Usually made to order, so ring us for the current lead time. Timber sizes vary slightly with the weather. Tanalith-E treatment is not a rot guarantee: inspect and re-treat regularly, and apply a final finish after fitting.

Prefer us to fit it? We supply and install gates across Shropshire, Staffordshire, Cheshire, the West Midlands and Mid Wales. Ask for a free site survey.

Additional information

Width

2400mm, 2700mm, 3000mm, 3300mm, 3600mm

Height

1200mm

Finish

Tanalised